Best Tall Shoe Closet: The Tall Option in This Set and What It Lacks

As an Amazon Associate we earn from qualifying purchases. Details

A tall shoe closet should hold shoes in a small floor footprint without leaving the upper storage out of reach or the unit at risk of tipping. This guide is shorter than most, because the listings in this set include only one tall shoe storage unit that fits the keyword. The rest are short slot stackers, a tall dresser, or a closet system that lists shoes only in passing. Read the height and anchoring notes before you compare capacities. The pick below explains what it does well, where it falls short, and what to check on its product page before you buy.

Quick answer

Only one listing in this set is a tall shoe storage unit: a seven-tier rotating tower that stands 63 inches high. Choose it if you want to see and reach shoes from every side in a small footprint, and you have a corner or wall to anchor it against. Choose a shorter option if your ceiling, door opening or walkway is lower than the tower. Slot stackers add shelf space, but they are not tall storage. In every case, plan a wall fix before you load the upper tiers, because the listing does not mention anti-tip hardware.

What “tall” means for a shoe closet

Tall is a height claim, not a capacity claim. A 63-inch unit can be useful in a closet, but its height does not tell you how many pairs it holds. The listing for this pick gives no pair count. It says the tiers can hold many shoes or bags, and it says the rack is built to hold different shoes. Do not plan around a number the listing does not state.

Height and anchoring

Tall units are the ones that tip. The US Consumer Product Safety Commission’s Anchor It! campaign says existing furniture can be anchored with inexpensive anti-tip brackets, and it recommends securing top-heavy furniture right away. The same campaign notes that children like to climb on furniture. Use studs or rated anchors, and check the wall type first. A stud finder can locate the framing behind the wall. The listing for this pick does not mention anti-tip hardware, so the anchoring plan is yours to make before the unit is loaded.

Closet fit and clearance

The listing gives a minimum required door width of 23.2 inches, which matches the width and depth of the base. Measure the door opening and the walkway in front of the closet before you buy. The room field on this listing lists bedroom, entryway and living room. It does not list closet, so a closet placement is outside what the listing describes.

Materials, finish and assembly

The listing’s material field says plastic, while a bullet says the tower is made of durable solid board. The two do not agree, so rely on neither until you check the product page. The finish fields also disagree: the color field says white, and the furniture finish field says grey. The listing says assembly is easy with the included instructions, and it includes the hardware.

How to choose a tall shoe unit

Choose by the space first, then check the listed numbers.

• Choose a tall, freestanding unit if you have floor space and a wall or corner to anchor it against.
• Choose a shorter stacker if the closet ceiling, the door opening or the walkway cannot take the full height. Stackers are a different product type, and they are covered below.
• Choose a closed cabinet with doors if dust and pets are the main problem. For a tall, narrow option with doors, see tall narrow shoe cabinets with doors.
• Measure the door opening, the ceiling and the space the unit needs to turn before you decide. A rotating unit needs more room than a fixed rack.

The pick

Best for a tall, rotating display

This pick is the only tall shoe storage unit in the set. It is a seven-tier tower that turns on a round base. The listing gives 23.2 inches for both depth and width and 63 inches for height. The title and bullets describe it as a display for shoes, with space for handbags and hats on the tiers. The listing says the tiers make every shoe visible. Its item weight is 31.9 pounds, so it is not a light unit to move around. The listing does not state a pair count, does not mention anti-tip hardware, and gives a minimum required door width of 23.2 inches. Choose this if you have a corner or wall to anchor it against and enough floor space for it to turn. Skip it if the door or hallway you need to pass through is narrower than the tower.

Other shoe products in this set

Several listings in this set are shoe storage, but they are not tall storage. Short slot stackers are sold as closet shoe storage. The listings describe them as space savers that stack two pairs in the footprint of one, and they stand only a few inches high. For a short closet option, see small shoe rack for closet floor or shoe stacker for closet.

Two other listings do not fit the keyword. A tall dresser with a hanging rack is listed for clothes storage, and its bullets mention room for more than three pairs of shoes at the bottom. A closet system with drawers lists linens, clothes, towels, books and toys as its uses, and it does not list shoes. Neither is a tall shoe closet, so this guide does not pick them.

Worked example: footprint and height

The base is 23.2 inches by 23.2 inches. Step 1: 23.2 times 23.2 equals 538.24 square inches of floor. Step 2: the unit is 63 inches tall, which is 63 divided by 12, or 5.25 feet. Check: 5.25 times 12 equals 63. Measure your own corner, then compare that floor area and height with the space you have.

Mistakes to avoid

• Counting pairs from a title or bullet. This listing does not give a count at all.
• Skipping the anchoring step on a 63-inch unit. Anchor before you load the top tiers.
• Buying a dresser or a clothes system because one bullet mentions shoes.
• Trusting one field when two fields disagree. The material and finish fields in this listing do not match their bullets or each other.
• Assuming a bedroom or entryway product will fit a closet. The listed rooms do not include closet.

FAQ

Is a rotating shoe tower a good tall shoe closet?

It can be, if you have floor space and a clear turning area. The listing describes a seven-tier tower that stands 63 inches tall and turns on a round base. Check the door width first, since the listing gives 23.2 inches as the minimum required door width.

Does the tower need to be anchored?

The listing does not mention anti-tip hardware. The CPSC says tall or top-heavy furniture can be anchored with inexpensive brackets, and a 63-inch unit should be secured to a wall or checked against the manufacturer’s instructions before you use it.

How many pairs does it hold?

The listing does not state a pair count. It says the tiers can hold many shoes or bags. Measure your own shoes, and compare the stack height against the tiers before you buy.

Can I put it inside a closet?

The listing’s room field lists bedroom, entryway and living room. It does not list closet. Check the clearance and the door swing in your closet before you decide.

Are slot stackers a tall shoe option?

No. They stack pairs in a row of slots and stand only a few inches high. They add shelf space, but they do not add height.

Is the finish white or grey?

The listing gives white in the color field and grey in the furniture finish field. Confirm which finish you are getting on the product page before you buy.

Bottom line

Choose the tall rotating tower if you have a corner or wall to anchor it against and enough clear floor for it to turn. Choose a shorter stacker or a closed cabinet if your opening, ceiling or wall plan cannot take 63 inches. Do not buy a dresser or a clothes system expecting it to work as a tall shoe unit, and check the room, color and finish fields before you order.

Sources

• US Consumer Product Safety Commission, Anchor It!: anti-tip brackets for top-heavy furniture, and children climbing on furniture
• Stud finder: what a stud finder locates behind a wall