Best Low Console Table
As an Amazon Associate we earn from qualifying purchases.
A low console table sits at about 18 to 32 inches high, lower than a standard hall table, so it can run behind a sofa or under a window without blocking the view. The best one depends on how low you need it, how deep it is, whether you want drawers, open shelves or doors, and how much weight the listing says it can carry. This guide compares seven listings, including a few that are really low bookcases or TV consoles, and explains what each one states about size, storage and load. Where a listing does not state a value, we say so.
Quick answer
- For a long low console with cube storage: the Garvee 62-inch eight-cube console is listed at 27.95 inches high and up to 250 pounds in total.
- For a low console behind a sofa: the Simple Trending 32-inch sofa table is 30.5 inches high, 10.5 inches deep and has a 50-pound maximum recommendation.
- For a TV console with drawer storage: the HOOBRO LED TV stand is listed at 55.1 inches long and 17.7 inches high, with one drawer and a charging station.
- For a wall-mounted low shelf: the TuckTect floating console is 5.43 inches high and 6.06 inches deep, in solid walnut.
How to choose a low console table
Start with height. A low console should sit below the bottom of a wall-mounted TV, below a window sill, or at the height of a sofa back. The listings in this group range from 5.43 inches on the TuckTect wall unit to 31.5 inches on the Vantimo and HOOBRO narrow consoles. The Garvee and SLEKVERSA long consoles sit about 28 to 30 inches high. The HOOBRO TV console is 17.7 inches high, the lowest of the freestanding units here.
Next, measure the depth. A console that runs behind a sofa needs a depth of about 9 to 11 inches to leave room for a lamp or a plant. The Vantimo and HOOBRO narrow consoles are 9 to 9.4 inches deep, the Simple Trending table is 10.5 inches deep, and the Garvee cubes are 13.8 inches deep. A deeper unit holds more, but it also takes more of the room.
Then decide what you want to store. Open cubes or shelves suit books, baskets and décor. Drawers keep remotes, cables and small items out of sight. The HOOBRO narrow console has two fabric drawers, the HOOBRO TV console has one drawer and a charging station, and the Garvee and SLEKVERSA units use open cubes. The Simple Trending table has a mesh shelf under its top, and the Vantimo table has open space beneath its top.
Last, check the load. Console tables are usually rated for the top and for shelves separately, and the listings state these figures in different ways. The Garvee listing gives up to 250 pounds in total, the SLEKVERSA listing gives 200 pounds, the Simple Trending listing gives 50 pounds, and the Vantimo listing gives 40 pounds. Children should not climb on any of these tables, and the HOOBRO narrow console listing says so directly.
Sizing and fit
The lengths in this group are more varied than the heights. The SLEKVERSA unit is 62 inches long, 13.4 inches deep and 30.1 inches high. The Garvee unit is 62.99 inches long, 13.8 inches deep and 27.95 inches high. The HOOBRO TV console is 55.1 inches long, 13.8 inches wide and 17.7 inches high, which suits a wall with a television above it. The Simple Trending table is 32 inches long, 10.5 inches deep and 30.5 inches high. The HOOBRO narrow console is 29.5 inches long, 9.4 inches deep and 29.5 inches high. The Vantimo table is 29.5 inches long, 9 inches deep and 29.5 inches high. The TuckTect wall unit is 31.5 inches long, 6.06 inches deep and 5.43 inches high.
Notice that the SLEKVERSA and Garvee listings give different widths for the same long format. The SLEKVERSA bullets give 13.4 inches for the width and the Garvee bullets give 13.8 inches. Both are shallow enough for a wall, but measure the wall before you choose. Check the length too, since a 62-inch unit needs a long run of wall or a clear space behind a sofa.
Materials and build
The materials differ across this group. The SLEKVERSA unit is engineered wood, which the listing describes as MDF with a metal frame. The Garvee unit is MDF with a reinforced metal frame, although one of its specs rows also names melamine, so confirm the surface material in the listing. The HOOBRO narrow console uses a black metal frame with particleboard and mesh shelves, and its fabric drawers are non-woven. The Vantimo table has an engineered wood frame with black legs, and the TuckTect wall unit is solid walnut. The Simple Trending table uses wood panels on a metal frame, and the HOOBRO TV console is engineered wood with tempered glass shelves.
MDF and particleboard are stable indoors but should stay dry. Metal frames add rigidity, and most listings in this group describe adjustable feet for uneven floors. The SLEKVERSA bullets say the surface wipes clean with a damp cloth.
Comparison at a glance
| Listing | Size (L x D x H, in) | Storage | Material | Stated load |
|---|---|---|---|---|
| SLEKVERSA 62-inch horizontal bookshelf (B0HGR8MC34) | 62 x 13.4 x 30.1 | 8 cubes, open back with panel | MDF with metal frame | 200 lb (bullets) |
| HOOBRO 29.5-inch narrow console (B0C1P1XWCT) | 29.5 x 9.4 x 29.5 | 2 fabric drawers, 2 mesh shelves | Metal frame, particleboard | Tabletop 44 lb (specs) or 88 lb (bullets) |
| Vantimo 29.5-inch narrow console (B0GWH7RVX8) | 29.5 x 9 x 29.5 | Open space under top | Engineered wood, black legs | 40 lb maximum recommendation |
| TuckTect wall-mounted console (B0FF49GNB7) | 31.5 x 6.06 x 5.43 | 1 door, 2 cabinets, middle shelf | Solid walnut | Not stated; 5 lb item weight |
| Simple Trending 32-inch sofa table (B0FRMPT7M3) | 32 x 10.5 x 30.5 | Mesh shelf beneath top | Wood panels, metal frame | 50 lb maximum recommendation |
| Garvee 62-inch cube console (B0H4WF11ZX) | 62.99 x 13.8 x 27.95 | 8 open cubes, enclosed back | MDF with metal frame | Up to 250 lb total (listing) |
| HOOBRO LED TV console (B0D97HF8YN) | 55.1 x 13.8 x 17.7 | 3 open compartments, 1 drawer | Engineered wood, tempered glass | Not stated |
The table uses the values printed in each listing. Where the bullets and the specs give different values, both are shown and the review text explains the gap.
Roundup: seven low console tables compared
1. SLEKVERSA 62-inch industrial horizontal bookshelf with 8 cubes
This long, low unit is 62 inches long, 13.4 inches deep and 30.1 inches high, with eight cube compartments. The bullets say a V-shaped base and a 3.1-inch semi-enclosed back panel help keep items from sliding off. The listing says the unit holds up to 200 pounds and can be used as a console, a cube shelf or a bookcase. The specs list a freestanding install and an item weight of 73 pounds. The shelf thickness is 1.2 inches at the top and bottom and 0.6 inches in the middle. Choose this unit for a long wall behind a sofa where you want cubes for baskets or books.
2. HOOBRO 29.5-inch narrow console table with 2 fabric drawers
This console is 29.5 inches long, 9.4 inches deep and 29.5 inches high. It has a wooden top, two non-woven fabric drawers, and two mesh shelves below. The listing describes a black metal frame with rustic brown panels and includes an accessory kit. The specs give a maximum weight recommendation of 40 kilograms, which is about 88 pounds, and a tabletop load of 44 pounds, while the bullets give 88 pounds for the tabletop and 33 pounds for each mesh shelf. Use the lower figures until you confirm them. The listing says children should not climb on or play with the table. Choose this model for a hallway or sofa wall that needs drawer space.
3. Vantimo narrow console table, 29.5 inches
This narrow console is 9 inches deep, 29.5 inches wide and 29.5 inches high. It has an engineered wood frame in a rustic brown finish with black legs. The listing says it fits behind a sofa, in a bedroom or in a hallway. The specs give a maximum weight recommendation of 40 pounds and an item weight of 7.5 pounds. The bullets describe adjustable footpads for uneven floors and a complete assembly kit. The listing does not state drawers, so the space under the top is open. Choose this table for a simple console with open space and no drawers.
4. TuckTect floating solid walnut console, wall-mounted
This is a wall-mounted unit rather than a floor console. It measures 31.5 inches long, 6.06 inches deep and 5.43 inches high, and it is solid walnut wood. The bullets describe one door, two cabinets and a middle storage shelf for magazines. The listing says the frame is rugged and includes a spirit level, a screwdriver and a hardware box. It also mentions a one-year warranty. The listing does not state a load figure, so check the wall fixings and keep the weight light. Choose this model where a floor console would take up too much room.
5. Simple Trending 32-inch sofa table with storage shelf
This sofa table is 32 inches long, 10.5 inches deep and 30.5 inches high, with two tiers and a mesh shelf beneath the top. The specs give a maximum weight recommendation of 50 pounds and an item weight of 12.8 pounds. The bullets describe wood panels on a metal frame, with four adjustable feet for uneven floors. The listing says assembly instructions and tools are included. Use the 50-pound figure for planning. Choose this table for a sofa wall or an entryway that needs a shelf for books and vases.
6. Garvee 62-inch eight-cube console
This long unit has eight open cubes, each 14.8 inches long, 13.8 inches deep and 11.5 inches high. The overall size is 62.99 inches long, 13.8 inches deep and 27.95 inches high. The listing describes an MDF body with a reinforced metal frame and states a load of up to 250 pounds for the whole unit, but the specs say the figure is not given per shelf. The bullets also describe metal corner protectors, enclosed back panels that the listing says keep dust away from stored items, and a floor-sealed base. The listing says it can be used as a sofa table or an entryway console. Choose this unit for a long low console with a clear total load.
7. HOOBRO LED TV console with power outlets and glass shelves
This is a low media console for a TV of up to 65 inches. It is 55.1 inches long, 13.8 inches wide and 17.7 inches high. The listing says it has three open compartments, one roomy drawer and a wide top, with a built-in power strip that has three AC outlets and three USB ports. The bullets describe an LED light strip with 20 colors, and the specs list the material as engineered wood, while the bullets describe tempered glass shelves. The listing does not give a load figure. Choose this unit if you need a low console for a TV with a drawer and a charging station, and not a table for a hallway.
Review: Garvee 62-inch eight-cube console
Of the seven listings, the Garvee unit gives the most storage in a long, low footprint. The eight cubes are each 14.8 inches long, 13.8 inches deep and 11.5 inches high, and the overall unit is 62.99 inches long and 27.95 inches high. At 27.95 inches, it sits lower than the 30-inch tables in this group, which helps when it stands below a window or a wall-mounted TV.
The cubes are open, which suits books, baskets and small boxes. The listing says the back panels are enclosed and the base is floor-sealed, and it says the enclosed back keeps dust away from what is stored. The listing describes metal corner protectors.
The load figure is the one to read carefully. The listing gives a total of up to 250 pounds, and the specs note that the figure is not stated per shelf. Plan around the total, but keep heavy items on the lower cubes so the weight sits low. The specs also name melamine in one row alongside MDF, so confirm the surface material in the listing before you buy.
The construction is MDF with a reinforced metal frame, and the listing gives the special feature of dust protection. The listing says the unit is freestanding and sits on a floor mount, and that it can be used as a sofa table or an entryway console. Measure the wall, the sofa back and the floor clearance before you buy, since a 62-inch unit needs a long, clear run.
Two close alternatives from the group fit the review. The SLEKVERSA unit is nearly the same length and gives a 200-pound figure, which suits a sofa wall where you want the same cube layout. The TuckTect wall unit is the choice when the floor is needed for something else, since it mounts on the wall. Choose the Garvee for a long console with a total load stated, the SLEKVERSA for a similar cube layout with a 200-pound figure, and the TuckTect for a wall with no floor space.
Mistakes to avoid
- Measuring the wrong height. A low console should sit below your TV or sofa back. Measure those first.
- Trusting the higher load in the bullets. The HOOBRO narrow console gives 44 pounds in its specs and 88 pounds in its bullets. Use the lower figure.
- Loading a wall unit without fixings. The TuckTect listing does not state a load, so check the mount before you add items.
- Assuming drawers on every console. Only the HOOBRO narrow console and the HOOBRO TV console list drawers.
- Placing a long unit in a short wall. The Garvee and SLEKVERSA units are about 62 inches long, which needs a long wall.
FAQ
How low is a low console table?
In this group the heights run from 5.43 inches on the wall-mounted TuckTect unit to 31.5 inches on the longer tables. The Garvee unit is 27.95 inches high, the Simple Trending table is 30.5 inches, and the HOOBRO TV console is 17.7 inches high.
How much weight can a low console hold?
It depends on the listing. The Garvee listing gives up to 250 pounds in total, the SLEKVERSA listing gives 200 pounds, the Simple Trending table gives a 50-pound maximum recommendation, and the Vantimo table gives 40 pounds.
Can a low console go behind a sofa?
Yes. The Simple Trending table is listed as a sofa table at 10.5 inches deep, and the Garvee unit is listed as usable as a sofa table. Check the depth against the gap behind your sofa before you buy.
Is any of these a TV stand?
The HOOBRO LED console is listed for a TV of up to 65 inches, with a drawer and a charging station. The other six listings are consoles, shelves or wall units and do not list a TV use.
Should a low console be anchored?
The listings for the freestanding units do not describe anchoring in the text in this guide. Anchor any unit that is tall or that sits near children, and mount the TuckTect unit to the wall with the hardware in its package.
Do these tables need assembly?
Yes, most do. The Vantimo listing includes a complete assembly kit, the Simple Trending listing includes tools, and the TuckTect listing includes a screwdriver and spirit level.
Related guides
For more low storage options, read Best Console Bookcases: Low Units Compared. If you want a low wood option with a different shape, Best Low Wood Bookcases: 3 Listed Options Compared covers that style.
Bottom line
Choose a low console table by checking height, depth and the load figure first. For a long low console with a stated total load, the Garvee cube unit is the clearest choice. For a narrow console with drawers, the HOOBRO 29.5-inch table fits a hallway. For a TV, the HOOBRO LED console is the low option with drawer and outlet storage. If the floor is full, the TuckTect wall unit keeps the floor clear, as long as the wall fixings hold.
