Sakugi vs MaxWorks: Utility Shelves, Fit and Setup

As an Amazon Associate we earn from qualifying purchases.

A utility shelf can be a fixed rack that stays where it is installed, or a wheeled cart that moves to the work. This page compares Sakugi with MaxWorks for the utility shelves Sakugi vs MaxWorks decision. Sakugi is a 72-inch, five-tier metal rack with a 1,000-pound rating. MaxWorks is a 36-inch, three-shelf plastic cart on four swivel casters, rated at 225 pounds. A third entry from OLLRRACT, a five-tier garage shelving unit, is included as a reference. Figures come from the listing fields checked 2026-10-12.

Quick answer

Choose Sakugi when the shelves should stay in one place and carry a heavier load on five levels. Its listing states a 1,000-pound maximum, a 72-inch height, and four leveling feet. Choose MaxWorks when the shelves need to roll between a garage, a workshop, and a kitchen. Its listing states four swivel casters, a 225-pound total, and a 75-pound limit for each of its three trays. The MaxWorks listing also says indoor use in its spec table, but its bullets name garages and warehouses, so check the room before buying.

Sakugi vs MaxWorks: listed figures in one table

Product	Listed figure	Field where it appears
Sakugi	12.6 inches deep, 33 inches wide, 72 inches high	Product Dimensions and title
Sakugi	1,000 pounds maximum	Weight Capacity Maximum and a bullet
Sakugi	8 kilograms item weight	Item Weight
MaxWorks	16 inches deep, 32 inches wide, 36 inches high	Product Dimensions
MaxWorks	225 pounds maximum, 75 pounds per tray	Weight Capacity Maximum and a bullet
MaxWorks	19.8 pounds item weight, 3 shelves, 4 casters	Item Weight, Number of Shelves, Number of Wheels
MaxWorks	Plastic and aluminum	Material and a bullet on the legs
OLLRRACT	24 inches deep, 48 inches wide, 72 inches high	Title
OLLRRACT	2,000 pounds maximum, 2,500 pounds minimum	Weight Capacity fields

The MaxWorks listing describes its material two ways. The spec table gives plastic only, while a bullet says the legs are aluminum. A bullet describes the shelves as injection-molded polypropylene, which fits the plastic named in the spec table. The table keeps both, because a buyer who needs a metal frame should check the legs before ordering.

Sakugi: five-tier heavy-duty metal shelving

The listing describes a black matte metal unit with five shelves, four non-slip leveling feet, and a wall fixing kit. The bullets say the tubes are 0.9 inches in diameter and that the unit is waterproof, rustproof, and simple to wipe clean. The spec table gives the same 1,000-pound maximum as the bullets.

The unit is sold as freestanding, with assembly instructions and hardware included. Its room list covers garages, kitchens, closets, and offices. Because it does not roll, the listing describes a fixed position on a floor that is level enough for the leveling feet.

MaxWorks: three-shelf wheeled utility cart

The bullets describe polypropylene shelves that resist rust and stains, with built-in side rails that keep a load from rolling off. Each tray is rated at 75 pounds, and the three trays together give the 225-pound total. The listing says the cart includes four non-marring swivel casters, and its push handles sit on each side.

The spec table gives an indoor recommended use and a 90-day manufacturer warranty. The bullets, however, list garage, office, workshop, warehouse, and home kitchen use. The room claims conflict, so a buyer planning to use the cart in a garage should not rely on the indoor label alone.

OLLRRACT: reference garage shelving

The OLLRRACT listing describes five adjustable tiers in a black powder-coated finish, with fireproof and waterproof features. Its spec table gives a 2,000-pound maximum and a 2,500-pound minimum, which contradict each other. The listing does not explain how the rating applies to a single tier.

Worked example: a 40-inch corner for a rolling cart

Take a corner 40 inches tall and 17 inches deep, with a walkway that a cart can pass through. MaxWorks’ 36-inch height fits the corner with 4 inches to spare, and its 16-inch depth fits with 1 inch to spare. Sakugi’s 72-inch height does not fit a 40-inch corner, so it is ruled out for that spot.

The cart’s load capacity is 225 pounds, which is about 22.5 percent of Sakugi’s 1,000-pound maximum. Three trays at 75 pounds each give the same total, and the figures agree. Sakugi’s per-tier figure is not stated, so the comparison uses only its total.

Weight is close. MaxWorks’ 19.8 pounds is a little heavier than Sakugi’s 8 kilograms, about 17.6 pounds, by roughly 2.2 pounds. The cart’s wheels make that difference less important, because a cart can be moved by pushing rather than lifting.

What the listings do not say

The MaxWorks listing does not state a brake for its casters, so a loaded cart on a slope may roll. The Sakugi listing does not say whether its leveling feet can handle a sloped garage floor. Neither listing gives a tip-over rating for the loaded unit.

The MaxWorks material field conflicts with its bullets on the legs, and the OLLRRACT rating conflicts with itself. The listings do not resolve either conflict, so the buyer should confirm them before buying.

How this comparison was built

Sakugi and MaxWorks come from the research file for this keyword. OLLRRACT was added as a third entry because it is a five-tier garage shelving unit and has a complete listing in the packet. Each figure is copied from a listing field checked 2026-10-12, and kilograms were converted at about 2.2 pounds per kilogram. The text was written for this page and reuses no sentences from an earlier draft. The page does not claim personal use of any product.

Related guides

A narrow shelf for a small room is covered in best shelves for a small room. For a larger metal unit in a utility space, best homedant 5 tier metal shelving covers a related format. The pantry under stairs storage solutions guide covers a tight utility corner.

Frequently asked questions

How much can each tray on the MaxWorks cart hold?

A bullet states that each tray is rated up to 75 pounds, and the three trays together give the 225-pound total in the spec table.

Can the MaxWorks cart be used in a garage?

The bullets list garage, workshop, and warehouse use, but the spec table gives an indoor recommended use. Confirm the use with the seller before storing tools in a garage.

Does the Sakugi unit roll on wheels?

No. The listing describes a freestanding unit with four leveling feet and a wall fixing kit, and it does not list casters.

Which is taller as listed?

Sakugi is taller, at 72 inches, compared with 36 inches for the MaxWorks cart.

Bottom line

For a fixed five-tier unit with a stated 1,000-pound total, Sakugi is the closer match when a floor position of 72 inches high is available. For a rolling three-shelf cart with a 225-pound total and a 36-inch height, MaxWorks fits a corner of about 40 inches tall. Confirm the MaxWorks material and room use before ordering, and check any caster brake with the seller.

Sources

• Listing fields for each product, checked 2026-10-12. This page has no external links.