FERO 27-Gallon Tote Rack Review: Fit and Load

As an Amazon Associate we earn from qualifying purchases. Details

The FERO 27-Gallon Storage Bin Rack is a black steel rack sold as a two-pack for holding 27-gallon tote bins in garages, basements, utility rooms and warehouse-style storage. This review covers what the Amazon listing says about tote fit, shelf spacing and load, and what the listing leaves for you to check.

This page reports listing data only. No product was measured or used for this page. Every figure comes from the Amazon listing for ASIN B0G29NW5DT, checked on October 12, 2026. The totes are not included. Confirm the current listing before you buy.

Quick answer

This rack suits you when you already own or plan to buy 27-gallon totes and want a steel frame that adjusts to tote width. It fits best where the floor can hold a 30-inch-deep, 23-inch-wide footprint and the bins stay within the listed 250-pound total. Skip it if your containers are not 27-gallon totes, if you need a shelf rated for a single heavy item, or if you cannot anchor the rack as the anti-tip instructions require.

What the listing states

• Size: 30.3 in deep, 22.8 in wide, 73.5 in high. Item weight 45 lb for the listing.
• Shelves: five tiers, 16.5 in standard vertical shelf spacing.
• Load: 250 lb total, 50 lb per tier when evenly distributed.
• Tote fit: rail spacing adjusts from 18 1/8 in to 20 1/2 in to take 27-gallon totes from different brands. The listing names several major retailer brands as examples of compatible totes.
• Safety: the listing says the rack can be placed against a wall, and that the mounting bases should be secured to complete the anti-tip installation, following the manual.
• Finish and hardware: powder-coated steel, black. Hardware is included. The totes are not.
• Use: the room types listed are basement, garage, laundry room, storage room and utility room.

Tote fit: the number that matters most

The rail spacing range is the detail that decides whether this rack works for you. A 27-gallon tote must sit between the rails, and the listing gives a range of 18 1/8 to 20 1/2 inches. Measure your tote’s width at the rim and the base before you order. If the tote is wider than the top of the range, it will not seat. If it is narrower than the bottom of the range, it may slide between the rails.

Shelf spacing is 16.5 inches. That is the vertical distance the listing gives for standard tiers. Check that your tallest tote, with its lid, fits the spacing you plan to use. A lid that sits at the bottom of one tier can crowd the tote above it.

Load and stability

The listing gives 250 lb total for the whole rack, with 50 lb per tier when weight is evenly distributed. Those two figures tell you to keep the load spread across tiers. Do not stack all the heavy totes on one level. The listing also gives a minimum weight of 50 lb in one of its fields, which is a different figure from the per-tier rating. Read the per-tier number as the one to plan around.

The anti-tip instructions matter. The listing says you may place the rack against a wall and then follow the manual to secure the mounting bases. If you have children, pets, or a rack that will be loaded at the top, do not skip that step. The listing does not describe a tip-over test result, so the anti-tip hardware is the safeguard to rely on.

Who it suits and who should skip it

The rack suits a garage, basement or utility room where 27-gallon totes are the standard container and the aim is to get them off the floor. Two units give you room to store a larger set of bins without a freestanding stack.

Skip it if your containers are shallower or narrower than the rail range, if you store one heavy item per shelf rather than bins, or if the wall and floor cannot take the anchoring the manual describes. A basket or a small cabinet is a better fit for light goods that do not need a tote.

Fit check before you order

1. Measure one 27-gallon tote at the rim and at the base. Confirm it falls within 18 1/8 to 20 1/2 inches.
2. Measure the floor footprint: 30.3 in deep by 22.8 in wide per rack.
3. Check the ceiling clearance against the 73.5-inch height.
4. Plan the load so that no tier exceeds 50 lb when the weight is spread across it.
5. Read the anti-tip section of the manual and set aside the hardware for the mounting bases.

Related guides

For a steel rack with a larger stated load, see Best Homedant 5-Tier Metal Shelving. For a wire shelf that stands on its own in a kitchen, read Best Free Standing Wire Shelves for Kitchen. For a tight space where a narrow footprint matters most, see Best Shelves for Small Room.

Worked example: tote width against the rail range

The listing gives a range of 18 1/8 to 20 1/2 inches between the rails. Measure the width of the tote you plan to use and check that it falls inside that range, because a tote outside it will not sit between the rails. Keep each tier at or under 50 lb, since the rack’s 250 lb total is spread across five tiers.

FAQ

Are the totes included?

No. The listing says the totes are not included. You need to buy 27-gallon totes separately and measure them against the 18 1/8 to 20 1/2 inch rail range.

How much weight can the rack hold?

The listing states 250 lb total, with 50 lb per tier when weight is evenly distributed.

Does the rack need to be anchored?

The listing says the rack can be placed against a wall and that the mounting bases should be secured following the manual to complete the anti-tip installation.

What is the shelf spacing?

The listing gives 16.5 inches of standard vertical spacing between tiers.

Bottom line

The FERO rack is a practical option for 27-gallon totes in a garage or utility room, provided the totes fall within the stated rail range, the load is spread across the tiers, and the anti-tip hardware is installed. If your bins fall outside the rail range, choose a different rack. Check the current listing before you buy.

View the FERO rack on Amazon (affiliate link)