Best Under Bathroom Sink Pull Out Storage: Seven Options Compared

As an Amazon Associate we earn from qualifying purchases. Details

Under bathroom sink pull out storage brings the bottles and cleaning supplies at the back of a vanity to the front, so you stop reaching blindly into the cabinet. This guide compares seven pull-out organizers, each described by its own product listing. It covers tier count, weight wording, cabinet fit, mounting method and the conflicts that appear in several listings. Pull-out units differ more in fit than in function, so the measurements come first. Where a listing gives two sizes, this guide notes the conflict and leaves the final choice to your own measurement.

Quick answer

Choose a C-shaped or L-shaped unit if pipes run through the back of your cabinet. The PXRACK is C-shaped and the Aekenr is L-shaped, and both listings are written with pipes in mind. For the highest weight figure in this group, the PXRACK lists 100 pounds as its maximum. For clear sorting drawers, the Delamu and the HIHEGD are the closest fit. The Kitstorack suits anyone who wants three tiers, and the Biboraya suits smooth ball-bearing slides. Measure the cabinet depth, the pipe path and the height at the back before you order.

What matters for under bathroom sink pull-out storage

Cabinet depth, height and the pipes

A pull-out has to clear the back wall of the cabinet and the plumbing that runs through it. Several listings handle the pipe problem with their shape. The PXRACK is described as C-shaped, so it can sit around pipes, and its bullets say it goes under a sink without hitting the plumbing. The Aekenr is L-shaped, with a small top and a wider bottom to accommodate pipes. Measure from the front of the cabinet to the back wall, and note exactly where the supply pipes come through. A shape that clears the pipes means you do not have to move them.

Height changes the fit

Heights vary across the group, and several listings give a range instead of one figure. The Aekenr specifications list a product height of 14.96 inches, and its bullets extend that to 16.92 inches. The PXRACK adjusts across five levels from 13.6 to 16.9 inches. The Biboraya lists five adjustable heights and a product height of 16.5 inches. Compare the tallest figure in each listing with the space under your sink, and not the shortest one, because the tallest figure is the one that will not fit if you guess.

Weight wording

Weight figures come in different forms, so compare them with care. The PXRACK lists 100 pounds as a maximum. The Aekenr lists 50 pounds as its shelf weight capacity. The Kitstorack bullets say it holds up to 60 lbs. The HIHEGD lists 20 pounds as its capacity. The Delamu gives its maximum in kilograms, so convert the figure before you compare it. The ukeetap and the Biboraya listings do not give a load figure at all, which means you should read their bullets for wording rather than assume a limit.

Mounting and drilling

Most of these organizers sit inside the cabinet without a drill. The Aekenr bullets say no drilling is required, and the ukeetap bullets say no tools are needed. The Kitstorack relies on suction cups and adhesive films, and the PXRACK also uses four suction cups and two nano tapes. The Biboraya ships with its ball-bearing slides pre-installed, so you only mount the brackets. Suction cups and adhesive films work best on a clean, smooth cabinet floor, so clean the surface before you start.

Materials and humidity

Bathroom cabinets are damp, so the material matters. Carbon steel is the frame material for the Aekenr and the Biboraya. The Biboraya adds a rust-resistant coating, and the Aekenr bullets say its steel prevents rust and water stains. The Kitstorack describes thicker steel, and the Delamu uses aluminum alloy support rods. The HIHEGD combines ABS plastic with stainless steel support tubes. Plating is one common way to add corrosion resistance. Chrome plating, for example, is a thin layer of chromium on metal that can provide corrosion resistance. Read the finish field and the bullets, and treat the words “rust resistant” as a claim to check, not a guarantee.

How to choose under bathroom sink pull-out storage

Answer three questions in order. First, do pipes run through the back of the cabinet? If they do, favour the C-shaped PXRACK or the L-shaped Aekenr, because their listings describe their shapes around plumbing. Second, do you need to see and sort contents quickly? If so, the clear drawers of the Delamu, the HIHEGD and the Kitstorack are the most visible options. Third, how heavy are the items? Heavy cleaning bottles point toward the PXRACK, the Aekenr or the Kitstorack, where the listings give load figures. Light toiletries work in almost any of the seven.

If your cabinet is already tight, choose the unit whose tallest figure still fits, and leave a little space for the drawer to slide. A pull-out that binds on the pipes or the cabinet frame is a poor purchase, however good the listing sounds.

The seven organizers, one at a time

Aekenr: L-shaped two-pack for pipes and tall bottles

The Aekenr comes as a two-pack of three-tier organizers with an L-shaped body. Its bullets describe a small top and a wider bottom that clears pipes while still holding tall bottles. The listing describes both the top and bottom baskets as pull-out, with handles on each. It names four suction cups on the bottom to stop sliding. Its specifications list 14.96 inches deep and 10.5 inches wide. The bullets say it suits most standard cabinets, and its recommended uses include cookware and pans, which is a heavier job than toiletries alone.

Delamu: four slide-out drawers in clear acrylic

The Delamu is sold as a two-pack. Each set has four slide-out clear acrylic drawers and eight movable dividers, according to its bullets. The bullets say the organizers stack three at a time, and each base has a silicone stopper that limits movement when a drawer is pulled. Two sizes are described: a smaller one measuring 8.27 by 13.19 by 9.06 inches and a larger one at 10.63 inches tall. The item weight is 2.4 pounds. The specification field lists two compartments, which conflicts with the four drawers in the bullets.

Kitstorack: three-tier metal organizer with 60 lbs wording

The Kitstorack is a metal organizer whose title describes a two-pack with three tiers. Its bullets say the extra tier gives 35% more storage capacity without taking extra space. They describe five or more height settings for bottles of different heights. The bullets also claim it holds up to 60 lbs, and that four large suction cups and two nano adhesive films keep it steady. Its product size is 15.6 by 11.8 by 16.9 inches, and its item weight of 11.31 pounds is the heaviest in this group. The manufacturer is named Kitstorack, although the brand field is blank.

HIHEGD: clear two-tier drawers with 12 dividers

The HIHEGD is a two-tier organizer with two slide-out drawers and see-through sides. Its bullets describe 12 removable dividers that create up to four compartments per tier. The bullets say the body is high-hardness ABS plastic, linked by four thickened stainless steel support tubes. The capacity field lists 20 pounds, which is the lowest load figure in this group. Its product dimensions are 11.7 by 7 by 10.6 inches. The mounting field reads tabletop mount, while the bullets describe a pull-out under a sink. Check which description matches the unit you receive.

PXRACK: C-shaped two-tier with a 100 pound maximum

The PXRACK has a C-shaped frame that the listing says can sit under a sink without hitting the plumbing. It has two tiers and five height levels that run from 13.6 to 16.9 inches. Its weight field lists a maximum of 100 pounds, the highest pound figure in this group. The bullets say there is room up to 13 inches below the top basket, and that the basket measures 11.8 inches wide and 15.9 inches long. Its item dimensions field reads 5 by 5 by 5 inches, which cannot describe the unit, so rely on the other figures. The care instructions say hand wash only.

ukeetap: no-tool bottom pull-out at 12.8 inches

The ukeetap is a two-pack with one bottom pull-out drawer on each unit. Its bullets size each organizer at 15 by 8 by 12.8 inches, and the specifications say no assembly is required. The bullets say no tools are needed, and that the organizers install in seconds. The construction combines thick plastic with a metal tube, and each item weighs 3.4 pounds. The listing does not give a load figure. It says only that the organizer will bear more weight without deforming, so check what you plan to store before you buy.

Biboraya: two-tier dual pull-out on ball-bearing slides

The Biboraya is a two-tier dual pull-out with ball-bearing slides and five adjustable heights. Its title and specifications agree on 14.5 inches deep, 10.62 inches wide and 16.5 inches high. The item weighs 7.9 pounds, which makes it heavier than most units here. Its bullets say the slides come pre-installed, so you only mount the brackets. The bullets mention a rust-resistant coating and an L-shaped structure that goes around irregular pipes. The Number of Items field says 2, while the Unit Count field says one, so check the box before you assume a pair.

Worked example: twelve items across the tiers

On a two-tier unit such as the PXRACK, twelve divided by two equals six items per tier. The check is simple: six times two equals twelve. On a three-tier unit such as the Kitstorack, twelve divided by three equals four items per tier. Four times three equals twelve, with nothing left over. Either layout works, but the heavy bottles belong on the lowest tier, where the pull-out carries them most safely. The listing’s weight wording still decides how heavy each tier may be.

Mistakes to avoid

• Measuring the front of the cabinet and missing the pipes at the back wall, where the fit actually fails.
• Designing around the shortest height in a listing when the tallest figure is the one that must fit.
• Reading the Delamu’s kilogram figure as pounds without converting it first.
• Assuming the Kitstorack has a listed brand, when its brand field is blank.
• Trusting the PXRACK item dimension field of 5 by 5 by 5 inches as the size of the unit.
• Buying a tabletop-mount unit for a cabinet pull-out, which the HIHEGD listing leaves unclear.

Who should skip a pull-out

Skip a pull-out if the cabinet has no room for a drawer to slide out, or if the pipes leave too little clearance at the back. If your sink is a pedestal with no enclosed cabinet, a pull-out has no place to sit, and a freestanding unit or wall shelf may suit you better. The pedestal sink storage cabinet guide covers that layout. If you want a simpler under-sink organizer without slides, the under sink cabinet organizer guide may fit. For a different layout entirely, see bathroom under basin storage.

FAQ

Will a pull-out fit my bathroom cabinet?

Check three measurements: the depth from the front to the back wall, the height at the back where the pipes run, and the width of the opening. Compare them with the tallest figure in each listing, and leave room for the drawer to slide without catching.

Can I install one without drilling?

Several listings say no. The Kitstorack and the PXRACK rely on suction cups and adhesive films instead. Follow the maker’s instructions for whichever method your unit uses.

How much weight can a pull-out hold?

The PXRACK lists 100 pounds as a maximum, the Kitstorack bullets say up to 60 lbs, the Aekenr lists 50 pounds as its shelf weight capacity, and the HIHEGD lists 20 pounds. The Delamu gives a kilogram maximum, and the ukeetap and the Biboraya give no load figure. Read the exact wording on the listing you pick.

Is a plastic or a metal organizer better for a bathroom?

Neither is better in every case. The Delamu and the HIHEGD use plastic bodies, with aluminum or stainless support rods, while the Aekenr and the Biboraya use carbon steel. The Biboraya adds a rust-resistant coating. Check the finish and the bullets for each unit, and remember that a rust claim is a statement to verify.

Why does one listing show a tabletop mount?

The HIHEGD mounting field says tabletop, while its bullets describe a pull-out under a sink. This conflict matters, because the installation depends on the mount. Ask yourself which description matches the unit you receive, and check the box contents against the bullets.

Which units can go around pipes?

The PXRACK is described as C-shaped so it can sit around plumbing, and the Aekenr is L-shaped with a wider bottom to clear pipes. The other listings do not describe pipe clearance in their shape, so measure your pipe path before you order one of those.

What should I check first on a listing?

Check the height range, the weight wording, the mounting method and the included parts. Where the title, the specifications and the bullets disagree, as they do for several units here, trust your own measurement over any single field.

Bottom line

For cabinets with pipes at the back, choose the PXRACK, which has a C-shaped frame and a listed maximum of 100 pounds, or the Aekenr for an L-shaped unit with a 50 pound shelf weight capacity. For clear sorting drawers, choose the Delamu or the HIHEGD. Choose the Kitstorack when you need three tiers, and the Biboraya when smooth slides matter most. Whatever you pick, measure the cabinet first, and match the tallest figure in the listing to the space you have.

Sources

• Chrome plating on Wikipedia: a thin layer of chromium on metal can provide corrosion resistance