Best Under Sink Roll Out Storage: Seven Options Compared

As an Amazon Associate we earn from qualifying purchases. Details

Under sink roll out storage brings the items at the back of a cabinet forward on a tray or drawer, so the spray bottle behind the pipes is no longer out of reach. This guide compares seven roll-out units, each described by its own product listing. Listings use pull-out and slide-out for this same kind of product, so this guide treats them as one category. It focuses on how each unit slides, how many levels it adds, what load wording it gives and how it fits around the plumbing. Where a listing gives two figures that disagree, this guide flags the conflict instead of choosing one for you.

Quick answer

A roll-out earns its place when the back of your cabinet is hard to reach and the items are light enough for the listed load. The Vtopmart is a set of three clear stackable drawers, which suits small toiletries and sprays. The Delamu offers four slide-out drawers with movable dividers. The Aekenr is the L-shaped option for cabinets with pipes, and it lists a 50 pound shelf capacity. The Kitstorack adds a third tier and carries the 60 lbs wording, though it is the heaviest body in the group. The Biboraya suits heavier supplies on ball-bearing slides. Measure the depth to the back wall and the path of the pipes first.

What makes a roll-out work under a sink

The drawer and the slide

A drawer is a box-shaped container that pulls out horizontally to reach what it holds, and drawers can be built from wood, composites, sheet metal or plastic. Under-sink roll-outs follow that same idea, but the slide does most of the work. The Biboraya lists ball-bearing slides that are pre-installed. The Vtopmart describes a built-in sliding rail. The Delamu bullets say each drawer slides smoothly in and out. A smooth slide keeps the drawer level when it is pulled out with a full load, so check how the listing describes its rail or slide before you compare the rest.

Height and how the levels stack

Roll-outs gain storage by adding levels, not by adding depth. The Vtopmart drawers have a groove design that lets them stack, and the Delamu bullets say you can stack three at a time. The Kitstorack describes three tiers and five or more height settings. The Biboraya offers five adjustable heights across two tiers. Measure the tallest level you need, then confirm that the top tier still clears the cabinet door hinge or the pipe above it.

Load wording

The listings give load figures in different forms. The Aekenr lists 50 pounds as a shelf weight capacity. The Kitstorack bullets say it holds up to 60 lbs. The HIHEGD lists 20 pounds as its capacity. The Delamu gives its maximum weight in kilograms, which you should convert before comparing. The Vtopmart, the ukeetap and the Biboraya give no load figure at all, so their bullets are the only guide to what they can carry.

Plumbing and shape

The Aekenr is L-shaped, with a small top and a wider base, so it clears pipes that would block a straight tray. The Biboraya bullets describe an L-shaped structure that fits around irregular pipes. The other listings do not describe pipe clearance in their shape, so measure the pipe path before you assume a straight drawer will fit.

Materials in a damp cabinet

Under the sink, damp air is the main enemy of a roll-out. The Vtopmart and the Delamu use clear acrylic bins, while the HIHEGD uses ABS plastic with stainless steel tubes. The Aekenr and the Biboraya use carbon steel, and the Kitstorack describes thicker steel. The Delamu also lists aluminum alloy support rods. Check each finish and frame material, and treat rust resistance as a claim to verify on the listing, not a promise.

How to choose an under sink roll-out

Start with the pipes. If they run through the back of the cabinet, favour the Aekenr or the Biboraya, because their shapes are described around plumbing. Next, decide how much you need to see. Clear bins from the Vtopmart, the Delamu and the HIHEGD make contents visible at a glance. Last, look at the load. Heavier cleaning supplies point you toward the Kitstorack, the Aekenr or the Biboraya, where the listings are most specific. For light toiletries and sprays, the rest of the list works well.

Keep the drawer-front clearance in mind as well. A roll-out that hits the cabinet door hinge will never close properly, so measure that gap before you buy.

The seven roll-outs, one at a time

Vtopmart: three stackable clear drawers

The Vtopmart is a three-pack of clear acrylic drawers in three heights. The bullets give the large size as 9.7 inches high, the medium as 7 inches and the small as 4.4 inches, all with a 12 inch length and a 7.5 inch width. Each drawer has a groove on top, so the units stack. The anti-slip silicone pads on the bottom keep each drawer from sliding while it is in the cabinet. The item weight is given only in kilograms, and the listing states no load figure. This set suits small items that you want to see, rather than heavy bottles.

Aekenr: L-shaped roll-out with handles

The Aekenr is a two-pack of three-tier units with an L-shaped body. Both the top and bottom baskets pull out and carry handles. The bottom has four suction cups to stop sliding when the basket is loaded. The specifications list a 14.96 inch depth, and the bullets give a height range that runs up to 16.92 inches. The listing names cookware and pans among the uses, which asks more of the slide than toiletries would. Its 50 pound shelf weight capacity is the figure to compare against any heavy cleaning load.

Delamu: four drawers with movable dividers

The Delamu is a two-pack of clear drawers with four slide-out drawers in total and eight movable dividers, according to its bullets. The drawers stack three at a time, and each base has a silicone stopper that holds the unit still when a drawer is pulled. The bullets describe two sizes, with the smaller measuring 8.27 by 13.19 by 9.06 inches. The specification field lists two compartments, which does not match the four drawers in the bullets. Its maximum weight recommendation is given in kilograms only.

Kitstorack: a third tier and 60 lbs wording

The Kitstorack is a metal organizer whose title describes a two-pack with three tiers. Its bullets say the third tier adds 35% more storage without taking extra room. It has five or more height settings and four large suction cups with two nano adhesive films. The bullets claim it holds up to 60 lbs. The product size is 15.6 by 11.8 by 16.9 inches, and the item weighs 11.31 pounds, the heaviest body in this group. Its brand field is blank, although the manufacturer is named Kitstorack.

HIHEGD: clear two-tier drawers that stack

The HIHEGD is a two-tier organizer with two slide-out drawers and see-through sides. Its bullets describe 12 removable dividers, and the trays can be combined into taller multi-tier cabinets. The capacity field lists 20 pounds, the smallest figure in this group. The product dimensions are 11.7 by 7 by 10.6 inches. The mounting field reads tabletop mount, which conflicts with the cabinet use the bullets describe. Confirm the mount type on the box before you plan the installation.

ukeetap: one bottom drawer with no tools

The ukeetap is a two-pack, and each unit has a single bottom drawer that pulls out for items at the back. Its bullets size each organizer at 15 by 8 by 12.8 inches. The specifications say no assembly is required, and the bullets say no tools are needed to install it. The construction combines plastic with a metal tube, and each unit weighs 3.4 pounds. The listing promises that the organizer will bear more weight without deforming, but it gives no figure. Use it for lighter supplies, and check the weight before you load it.

Biboraya: dual tiers on ball-bearing slides

The Biboraya is a two-tier dual pull-out with ball-bearing slides and five adjustable heights. Its title and specifications agree on 14.5 inches deep, 10.62 inches wide and 16.5 inches high. The bullets say the slides come pre-installed, so you only mount the brackets. They also describe a rust-resistant coating on the carbon steel frame. The item weighs 7.9 pounds, which makes it heavier than most units here. The Number of Items field says 2, while the Unit Count field says one, so confirm what arrives in the box.

Worked example: nine items across three drawers

Nine divided by three equals three items per drawer. The check is simple: three times three equals nine, so nothing is left over. If you swapped in the Kitstorack’s three tiers, the same split would hold. The sum does not tell you the load, though, because the Vtopmart listing states an item weight but no load figure, so keep the heaviest items on the lowest drawer.

Mistakes to avoid

• Measuring the cabinet door opening and forgetting the drawer front, which must clear the hinge when the unit closes.
• Buying a straight tray for a cabinet where the pipe path blocks it, when the Aekenr or the Biboraya was designed around that obstacle.
• Reading the Delamu weight in kilograms as if it were pounds.
• Expecting the Kitstorack to stay put on a rough cabinet floor, since its grip depends on the suction cups and adhesive films.
• Trusting the HIHEGD mounting field without checking which mount the unit actually uses.
• Skipping the stackability check on the Vtopmart, where the groove design decides whether the drawers can sit one on another.

Who should skip a roll-out

Skip a roll-out if the cabinet is too shallow for a tray to slide out past the pipes, or if the door hinge will catch the front. If your sink is a pedestal with no enclosed cabinet, a roll-out has nothing to slide in. The under sink organizer for the kitchen guide and the storage drawers under sink guide cover other layouts. If you only need to hang a few items, the under sink wire rack guide may be simpler.

FAQ

Will a roll-out fit under my sink?

Measure the depth from the front of the cabinet to the back wall, the pipe path, and the width of the opening. Compare them with the largest dimensions in each listing. Leave enough space for the drawer front to close past the hinge.

Can I install a roll-out without drilling?

Several listings say so. The ukeetap bullets say no tools are needed, and the Aekenr bullets describe no drilling. The Kitstorack and the Delamu rely on suction cups, silicone stoppers or adhesive films to hold position. Follow the maker’s instructions for whichever method your unit uses.

How much weight can a roll-out hold?

The Aekenr lists 50 pounds as its shelf weight capacity, the Kitstorack bullets say up to 60 lbs, and the HIHEGD lists 20 pounds. The Delamu gives a kilogram maximum. The Vtopmart, the ukeetap and the Biboraya give no load figure. Read the wording on the listing you choose before you fill it.

Are clear drawers better than open baskets?

They solve different problems. Clear drawers from the Vtopmart, the Delamu and the HIHEGD show what is inside, which helps with small items. Open baskets such as the Aekenr’s suit larger bottles that need airflow and room to reach. Choose on what you store most often.

Does a roll-out fit around the drain pipe?

Only the Aekenr and the Biboraya describe a shape that goes around pipes. The Aekenr is L-shaped with a wider base, and the Biboraya bullets describe an L-shaped structure for irregular pipes. The other listings do not describe pipe clearance, so measure before ordering one of them.

What should I check first on a listing?

Check the tier count, the drawer or tray depth, the load wording, the mounting method and the included parts. If two figures in one listing disagree, as they do for the Delamu and the HIHEGD, measure your own cabinet and rely on that.

Bottom line

For a roll-out that clears pipes, choose the Aekenr, which is L-shaped and lists a 50 pound shelf capacity, or the Biboraya if you want smooth ball-bearing slides. For clear, visible drawers that sort small items, choose the Vtopmart or the Delamu. The Kitstorack suits a third tier and the 60 lbs wording, provided your cabinet floor is smooth. Measure the cabinet first, then match the tallest figure in the listing to the space you have.

Sources

• Drawer on Wikipedia: a drawer is a box-shaped container that pulls out horizontally, and it can be built from wood, composites, sheet metal or plastic