Drawers for Under Vanity

As an Amazon Associate we earn from qualifying purchases. Details

Drawers for under a vanity come in two forms: metal pull-out frames that mount inside the cabinet, and clear stackable drawer sets that sit on the cabinet floor. Both turn a dark cabinet into something you can reach into, but they fit different cabinets. This guide compares six listings opened on 2026-10-18, with the sizes, loads and fit notes each one states, plus the places where a listing and its customer reports disagree. Read the table first if you already know your cabinet width, and use the detail sections to rule options out.

Quick answer

For a cabinet with a drain pipe in the middle, the C-shaped PXRACK frame and the reversible LYNK unit are the two built around plumbing. For a cabinet that is narrow or an odd width, the Golener frame expands from 12 to 18.5 inches. For loose, no-frame drawers that hold skincare and hair products, the two Vtopmart sets are the lighter option, with a stated 15 lb limit. Measure the cabinet opening first, because every number below is a listing figure and the frames add width.

How we chose

We searched Amazon for “drawers for under vanity” and kept listings that are pull-out or stackable drawers and that name a vanity, a bathroom cabinet or an under-sink cabinet in the title or bullets. Rolling makeup carts and desk drawer units were left out, because they do not go inside a vanity. Each product page was opened once. Prices, star ratings and review counts are not shown. Customer reviews were read only to catch problems the listing does not mention.

Comparison table

Pick	Listed size	Listed load	Type
PXRACK 2-tier, Large 2-pack	Baskets 11.8 in W x 15.9 in L; height 13.6 to 16.9 in	Do not exceed 100 lb (listing safety note)	Steel frame, both baskets slide out
Kitstorack 3-tier, 2-pack	15.6 x 11.8 x 16.9 in	Up to 60 lb	Carbon steel frame, 3 sliding tiers
LYNK PROFESSIONAL, chrome	11.5 in W x 18 in D	Not stated	Reversible two-tier slide-out shelves
Golener 2-tier, 16 in deep	Width 12 to 18.5 in; depth 15.7 in; height 13 to 15.5 in	Up to 80 lb	Expandable iron frame
Vtopmart pull-out, 4-pack	11.8 in L x 7.5 in W x 10 in H each	Top drawer up to 15 lb	Clear PET two-drawer unit
Vtopmart stackable, 4-pack, 9.7 in	12 in D x 7.5 in W x 9.7 in H each	15 lb when stacked	Clear stackable drawers

Picks in detail

1. PXRACK Under Sink Organizer, 2 Tier, Large 2-Pack

Best for: a vanity with a center pipe. Skip if: the cabinet is lower than 13.6 inches inside.

Checked on 2026-10-18: the C-shaped design is meant to clear plumbing. Height has five levels from 13.6 to 16.9 inches, and the space under the top basket is up to 13 inches. The bullet gives the baskets as 11.8 inches wide by 15.9 inches long, while the description gives a total of 11 inches W x 16 inches D, so confirm with the seller before you cut a tight fit. The kit has four suction cups and two nano tapes. A buyer warns that once the adhesive is down the unit is hard to move, so set the shelf heights first. View the PXRACK organizer on Amazon.

2. Kitstorack Under Sink Organizer, 3-Tier, 2-Pack

Best for: a taller, wider vanity where you want three levels. Skip if: the cabinet is under 17 inches deep.

Checked on 2026-10-18: 15.6 x 11.8 x 16.9 inches, with five or more height settings and a listed hold of up to 60 lb. The description says one organizer needs a cabinet at least 13 inches wide, 17 inches deep and 17 inches high, and two need at least 26 inches of width. It also tells you to check for obstructions at the back. A reviewer who put it under a vanity says the drawers wiggle a little, and another says they are not perfectly level. A third found one of the 12 rods lacked a groove for a screw. View the Kitstorack organizer on Amazon.

3. LYNK PROFESSIONAL Pull Out Under Sink Organizer, 11.5 in x 18 in, Chrome

Best for: a narrow vanity with plumbing to one side. Skip if: you need the shelf to come fully out.

Checked on 2026-10-18: two tiers, reversible to fit the right or left of the cabinet, with a removable tray on the top shelf. The listing names bathroom vanity cabinets and describes steel and chrome construction with ball-bearing glides and hardware included. It does not state a load. A reviewer reports the shelf slides about two thirds to three quarters of the way out, another says only the top shelf has a plastic liner, and one reviewer had to cut back rails to clear a drain pipe. View the LYNK organizer on Amazon.

4. Golener 2-Tier Expandable Pull Out Cabinet Organizer, 16 in Deep

Best for: an unusual cabinet width. Skip if: your cabinet is very deep, since the shelf does not slide out far in one reviewer’s deep cabinet.

Checked on 2026-10-18: width expands from 12 to 18.5 inches, depth is 15.7 inches, and height runs from 13 to 15.5 inches. The iron frame lists a hold of up to 80 lb, and the 2-rail damped slides pull out fully. It installs with nano adhesive or screws. The listing asks you to verify the cabinet opening against its dimensions, and the page carries a “Frequently returned item” badge. A reviewer notes the slider frame adds to the total width. View the Golener organizer on Amazon.

5. Vtopmart 4 Pack Pull Out Bathroom Under Sink Organizer

Best for: toiletries and skincare in a small cabinet. Skip if: you store tall bottles, because the side walls are low.

Checked on 2026-10-18: each unit measures 11.8 in L x 7.5 in W x 10 in H with two pull-out drawers on tracks, made of PET plastic and four stainless steel tubes. No tools are needed. The top drawer is listed to hold up to 15 lb, and eight silicone pads keep it from sliding. A reviewer says the side walls are about 2 inches tall, so a tall bottle can tip if you pull the drawer fast. The set covers four 2-tier units, so a 3-tier build needs extra rods. View the Vtopmart pull-out set on Amazon.

6. Vtopmart 4 Pack Clear Stackable Storage Drawers, 9.7 in High

Best for: bottles up to 7 inches high, kept dust-free. Skip if: you have a floor-level cabinet and trouble bending, since the handle sits low.

Checked on 2026-10-18: each drawer unit is 12 in D x 7.5 in W x 9.7 in H and fits bottles up to 7 inches high. The set bears 15 lb when stacked, and the plastic is listed as BPA free and shatter-resistant. Wash by hand, not in the dishwasher. A reviewer says the drawers taper at the bottom, wasting some space in the square frame, and another notes the handle is at the bottom of the drawer. View the Vtopmart stackable drawers on Amazon.

Worked example: a 24-inch-wide vanity cabinet with a center pipe

Say the cabinet opening is 24 inches wide and the pipe leaves about 9 inches clear on each side. A Vtopmart pull-out unit is 7.5 inches wide, so it fits on either side with 1.5 inches to spare. A Golener frame at its narrowest is 12 inches wide, which does not fit either side, but the frame could take the full 24 inches if you remove the center clutter and the pipe allows it. Run the same check with your own numbers, and add the slider frame width noted by reviewers.

Mistakes to avoid

Trusting one dimension line

The PXRACK listing gives two different size lines. When a listing contradicts itself, ask the seller or leave a margin.

Placing adhesive before choosing heights

A PXRACK buyer reports that moving the upper shelf after the adhesive was down was hard. Fix the height first.

Stacking more weight than the listing allows

The Vtopmart sets state 15 lb. Keep heavy jugs on a metal frame, and use the stated limit of each unit.

FAQ

Which drawers fit around a drain pipe?

The PXRACK listing describes a C-shaped design that clears plumbing, and the LYNK listing says its design is reversible to fit around plumbing on either side. One LYNK reviewer still had to cut back rails on a very tight cabinet.

Do these need tools?

The Vtopmart pull-out listing says no tools are required. The Golener listing says it installs with nano adhesive or screws. The Kitstorack listing mentions suction cups and nano adhesive films, and the LYNK listing says hardware is included.

Can I use them for something other than a vanity?

Several listings also name kitchen, pantry or laundry cabinets. Check the stated dimensions against that space first.