best-garbage-can-cabinet-insert
As an Amazon Associate we earn from qualifying purchases. Details
A garbage can cabinet insert is a pull-out frame or rack that fits inside a kitchen base cabinet, usually under the sink, so the trash bin slides out on drawer-style rails. Most listings sell the frame without the bin, so the bin size and the cabinet opening both matter before you buy. The listings we opened give their own minimum cabinet sizes, which range from 12 in wide to 16 in wide, and their own weight figures, where they state one. Many listings also say the bin is not included, and some are sold as two-bin kits for recycling and trash. This guide compares six listings on the numbers they state and gives a measuring method.
Quick answer
For one standard bin in a narrow base cabinet, the Insputer single pull-out (listed for a 12 in wide opening) is the simplest match on the stated dimensions. If you want two bins, the Insputer dual kit and the SPAXMAXTER dual rack list larger minimum openings, so measure first. The RUNMI kit is the choice to check when the opening is about 12 in wide and you want a door-mount option. Measure the cabinet, then choose the one whose listed minimum fits with room to spare.
What the person typing “garbage can cabinet insert” wants
The reader wants a hidden trash or recycling bin inside a cabinet, with a frame that fits their exact opening. They need the minimum cabinet size, whether the bin is included, the stated weight rating, and whether the slides close softly. They do not need a generic list of bins.
How we chose
We listed the pull-out trash can kits that appear in Amazon search for this phrase and kept only those that are a frame, rack or slide kit for a cabinet bin. We left out drop-in countertop chutes, trash bag dispensers, open wastebaskets and replacement bins that need a frame you do not have. Each product below was checked once on its Amazon listing on 2026-10-17. Specs come only from those listings. Where a listing gives two numbers that disagree, we show both.
The listings do not state the bin size, the slide load rating in every case, or the test method behind any rating. Where a listing does not state a value, we say so.
Comparison table (listing specs, checked 2026-10-17)
| Product | Bin included | Cabinet opening stated | Weight rating stated | Slides |
|---|---|---|---|---|
| Insputer Pull Out Trash Can Cabinet (single) | No | 12-15 in W x 18 in D minimum (title: 12 in W x 18 in D) | Up to 100 lb | Soft-close |
| Insputer Dual Pull Out Trash Can (two bins) | No | 15-18 in W x 24 in D (title: 17 in W x 24 in D); see conflict below | Up to 120 lb | Soft-close |
| LYNK PROFESSIONAL Pull-Out Trash Can Drawer | No | Not stated in the text we read | Not stated in the text we read | PROGLIDE commercial glides (listing) |
| SPAXMAXTER Dual Trash Can Pull Out (two 35 qt bins) | No | At least 16 in W x 23 in D x 17 in H | Not stated in the text we read | Quiet close (title) |
| RUNMI Pull Out Trash Can Under Cabinet | No | Minimum 12 in W x 17 in D x 12 in H | 200 lb (title) | Ball bearing, soft and quiet (listing) |
| Tanamu Pull Out Trash Can Under Cabinet & Under Sink | No | 13 in W x 18 in D (title) | Not stated in the text we read | Ball bearing track |
Insputer Pull Out Trash Can Cabinet (single)
1. Insputer Pull Out Trash Can Cabinet with Soft-Close Slides
Specs (from the listing, checked 2026-10-17): Slide-out shelf 10.6 in W x 16 in D x 12 in H. Fits a minimum cabinet opening of 12 to 15 in W by 18 in D. Heavy-duty steel with a stated capacity of up to 100 lb. Holds a 28 to 40 qt can (trash can not included). Available in Single and Double sizes; this entry is the single. Silver color. Installation videos and instructions are included.
What the listing states that matters: the screws connecting the cabinet door are 12 mm, so measure door thickness first to avoid poking through. The listing also says the frame is fully adjustable after installation for door alignment.
Best for: a single standard bin in a 12 in wide base cabinet, where the listing minimum is an exact match.
Skip if: your opening is narrower than 12 in or shallower than 18 in, or you need two bins.
View on Amazon (affiliate link)
Insputer Dual Pull Out Trash Can (two bins)
2. Insputer Dual Pull Out Trash Can Under Cabinet with Soft-Close Slides
Specs (from the listing, checked 2026-10-17): Holds two 28 to 40 qt (7 to 10 gal) cans; the cans are not included. Slide-out shelf 14.6 in W x 22.04 in D x 12 in H. Heavy-duty steel with a stated capacity of up to 120 lb. Soft-close slides. Silver color. The listing says it hides trash completely inside the cabinet when closed.
Conflict to check: the title says it requires a minimum cabinet of 17 in W x 24 in D. The bullets say it fits a minimum cabinet of 15 to 18 in W x 24 in D. We do not resolve this. Use the wider number if your cabinet is close to 17 in.
Best for: separating trash and recycling in one wide cabinet.
Skip if: your opening is under 15 in wide or under 24 in deep.
View on Amazon (affiliate link)
LYNK PROFESSIONAL Pull-Out Trash Can Drawer
3. LYNK PROFESSIONAL Pull-Out Trash Can Drawer (bin not included)
Specs (from the listing, checked 2026-10-17): A rack, not a complete kit: the bin is not included. The listing describes an adjustable design that fits a variety of containers and bins, and it comes in 2 sizes. The PROGLIDE system uses commercial glides under the organizer, with reinforced cross bars. The listing states a lifetime limited warranty; we did not open the warranty terms.
What the listing does not state: the cabinet opening it needs and the weight rating are not in the text we read. Confirm both on the listing before you buy.
Best for: a bin you already own, where you want a sturdy rack with adjustable fit.
Skip if: you need the exact cabinet minimum stated in writing, or you want a kit that includes a bin.
View on Amazon (affiliate link)
SPAXMAXTER Dual Trash Can Pull Out
4. SPAXMAXTER Dual Trash Can Pull Out Under Kitchen Sink (no bin)
Specs (from the listing, checked 2026-10-17): The rack measures 15.2 in W x 21.7 in D x 16.1 in H when not extended, and extends to about 42 in long when fully pulled out. The listing asks for a cabinet interior of at least 16 in W x 23 in D x 17 in H. It fits two 9-gallon (35 qt) bins; bins are not included. The listing says it has a quiet close shelf and claims reduced odor; we did not verify the odor claim.
Best for: two bins under a sink with a 16 in or wider opening and at least 23 in depth.
Skip if: your cabinet is narrower than 16 in or shallower than 23 in.
View on Amazon (affiliate link)
RUNMI Pull Out Trash Can Under Cabinet
5. RUNMI Pull Out Trash Can Under Cabinet, Soft Close, 200 LB
Specs (from the listing, checked 2026-10-17): The kit measures 10.6 in W x 15.5 in D x 10.6 in H and fits one can up to 40 qt. The listing gives a minimum cabinet size of 12 in W x 17 in D x 12 in H. Reinforced steel frame with a black coating. Ball-bearing slides, described as soft and quiet. You can mount it to the cabinet base or to the door. The title gives a 200 LB rating; the bullets we read do not repeat that figure.
Best for: a single bin in a cabinet close to 12 in wide, where a door mount is needed.
Skip if: you need two bins or a cabinet narrower than 12 in.
View on Amazon (affiliate link)
Tanamu Pull Out Trash Can Under Cabinet and Under Sink
6. Tanamu Pull Out Trash Can Under Cabinet and Under Sink (no bin)
Specs (from the listing, checked 2026-10-17): Fits 30 to 40 qt bins. The title gives a cabinet opening of 13 in W x 18 in D. Chrome finish, heavy-duty steel. Ball-bearing track. The base comes assembled and needs four screws into the cabinet floor.
Best for: a 13 in by 18 in opening and a bin you already own, with the simplest install in this list.
Skip if: you need a stated weight rating, because the text we read does not give one.
View on Amazon (affiliate link)
How to measure before you buy
Measure the interior of the cabinet, not the door. Take the width at the narrowest point, the depth from the front edge of the cabinet to the back wall, and the height to the top of the opening. Then check for hinges, drain pipes, and the water supply under a sink. The RUNMI listing tells buyers to check for hinges, pipes and shelves, and the Insputer listing warns about the downspout when the unit is used under a sink. Compare your numbers with the listing minimum, not the title alone.
Next, measure the bin you plan to use. The shelf must clear the bin height and the lid. Use the listing dimensions for the rack, and your own measurement for the bin.
Worked example
Say your base cabinet has an opening of 13 in wide, 18 in deep, and 17 in tall at its tallest point. Check the six listings above against those numbers:
- Insputer single: needs 12 to 15 in W and 18 in D. Fits: width and depth are within the stated range.
- Insputer dual: needs 15 to 18 in W (title: 17 in W) and 24 in D. Does not fit: 18 in depth is short of 24 in.
- SPAXMAXTER: needs at least 16 in W and 23 in D. Does not fit: width and depth are short.
- RUNMI: needs 12 in W, 17 in D and 12 in H. Fits.
- Tanamu: needs 13 in W and 18 in D. Fits exactly on the width, with no spare space.
From that check, the RUNMI kit fits with room on both the width and depth. The single Insputer fits the width with room to spare, but its 18 in depth matches the listing minimum exactly, so there is no margin. The Tanamu matches the width exactly. Each listing sets its own minimum, so use the listing value and not a generic one.
Mistakes to avoid
- Buying a bin that is taller than the listed clearance. The Insputer listing notes that the bin height must be considered.
- Assuming the bin is included. Most listings above say the trash can is not included.
- Mounting to a door that is too thin for the screws. The Insputer listing uses 12 mm screws, so check the door thickness first.
- Ignoring the weight rating. A bin with food waste is heavier than an empty bin, and only some listings state a figure.
Who should skip buying a cabinet insert
Skip a pull-out frame if your cabinet has a fixed plumbing layout that blocks the slide, if the opening is smaller than every minimum in this list, or if a freestanding bin in a cabinet door works for you. A shallow drawer or a countertop bin may be enough for a small kitchen.
What we could not verify
Whether a listed minimum opening fits your cabinet, since frame thickness and door hinges are not described in every listing. The bin size each kit takes is often not stated, and the listings do not explain installation in full. Where listings disagree on a figure, we show both values rather than pick one.
FAQ
Does a garbage can cabinet insert include the trash can?
In most listings above, no. The Insputer single and dual, LYNK, SPAXMAXTER, RUNMI and Tanamu listings all say the bin is not included. Read the title and bullets before ordering.
What cabinet size do I need?
Use the minimum on each listing. The listed minimums range from 12 in wide (Insputer single, RUNMI) to 16 in wide and 23 in deep (SPAXMAXTER). Where a listing gives two numbers, we show both.
How much weight can a pull-out trash can hold?
The Insputer single lists up to 100 lb and the Insputer dual lists up to 120 lb. The RUNMI title lists 200 LB. The LYNK, SPAXMAXTER and Tanamu listings do not state a figure in the text we read.
Do these need drilling?
Most kits attach with screws into the cabinet base or door, and the Insputer listing includes templates and installation videos. Check the listing instructions for your cabinet.
Are soft-close slides worth it?
The listings describe soft-close or quiet-close slides on the Insputer, RUNMI and SPAXMAXTER products. We did not test the slides, so use the listing description as the only source.
Can I use one under the sink?
Some listings are made for under-sink use. Check the drain and water lines, and confirm the downspout clears the bin, as the Insputer listing advises.
