VEVOR 60 in 5-Tier 3000 lb Garage Shelving Review

As an Amazon Associate we earn from qualifying purchases. Details

The VEVOR 5-Tier 3000 lb Garage Shelving unit is a black powder-coated steel rack, 60 inches wide, 24 inches deep and 71.4 inches high, sold for garages, workshops, warehouses and similar spaces. This review covers what the Amazon listing says about load per shelf, the steel build and assembly, and what to confirm before you order.

This page reports listing data only. No product was measured or used for this page. Every figure comes from the Amazon listing for ASIN B0HHBL4W1K, checked on October 12, 2026. Confirm the current listing before you buy.

Quick answer

This is a heavy-duty garage shelving unit for bulk storage: tool boxes, auto parts, storage bins and seasonal gear. The listing gives 600 lb per shelf and 3,000 lb total. Choose it when a 60 by 24 inch footprint fits the wall, the floor is level and you need a wide, deep rack. Skip it if the space is narrower than 60 inches, if you need a closed cabinet, or if you need a slim unit for a small room.

What the listing states

• Size: 24.1 in deep, 60.1 in wide, 71.4 in high.
• Load: 600 lb per shelf and 3,000 lb total, according to the bullet points and the specification table.
• Shelves: five adjustable shelves. The listing says the shelf height can be changed to fit large bins, toolboxes and auto parts.
• Steel: SPCC carbon steel with a Q235 component and powder coating. The listing describes reinforced beams and double-layer uprights.
• Shelf panels: thickened wire-mesh steel panels, which the listing says promote airflow and reduce damp and dust build-up.
• Assembly: a rivet-lock structure, so the listing says the unit goes together without screws. The package includes gloves and a rubber mallet.
• Stability: leveling feet, according to the listing.
• Weight: 62.8 lb.
• Model: SFM6024RAS.

Load per shelf and total

The listing gives 600 lb per shelf. Five shelves at that rating add up to 3,000 lb, which matches the total figure. That total assumes an even spread of weight across all shelves, and the listing does not describe how the load is distributed in practice. Put the heaviest items, such as engine parts or heavy tool boxes, on the lower shelves and keep the top shelves for lighter loads.

Check the floor before you load the unit. A rack with 3,000 lb total capacity is only as stable as its base. Use the leveling feet, check that the rack is plumb, and confirm the floor can carry the combined weight of the shelves and the load.

Assembly and handling

The unit weighs 62.8 lb, so plan for two people when you lift the shelves into place. The listing describes a rivet-lock structure with clear illustrated instructions, and includes a rubber mallet with a metal handle. Lay out every part and check it against the list before you start the build.

Wire mesh and airflow

The wire mesh shelves are a practical feature for a garage. The listing says the mesh promotes airflow and reduces damp and dust build-up, which suits a garage or basement that gets humid. Mesh does not hold small loose items, so use bins or trays on the shelves if you store small parts.

Who it suits and who should skip it

The unit suits a garage, workshop or storage area that needs wide, deep shelves for heavy bins and tools. It is also suitable for a warehouse or auto parts area that needs open storage with a stated high load.

Skip it if your space is narrower than 60 inches or shallower than 24 inches, if you need a closed cabinet, or if you need a slim unit for a living room or bedroom.

Fit check before you order

1. Measure the wall or floor space: 60 inches wide and 24 inches deep.
2. Check the ceiling clearance against the 71.4-inch height.
3. Plan the heaviest items for the lower shelves, and keep each shelf at or below 600 lb.
4. Check the floor is level and set the leveling feet before loading.
5. Plan for two people during assembly.

Related guides

For a steel rack with a similar footprint, see Best Homedant 5-Tier Metal Shelving. For a wire shelf for a kitchen, read Best Free Standing Wire Shelves for Kitchen. For a space where depth and footprint are tight, see Best Shelves for Small Room.

Worked example: footprint and load per shelf

The listed size is 60.1 inches wide and 24.1 inches deep, and the unit stands 71.4 inches high. Each shelf is rated at 600 lb, so the heaviest tote on any one tier should stay under that number. The 3,000 lb total is the limit for the whole stack, not for a single tier.

FAQ

What is the load capacity?

The listing’s load figures are 600 lb per shelf and 3,000 lb total.

What size is the rack?

The listing gives 24.1 inches deep, 60.1 inches wide and 71.4 inches high.

Does it need screws?

The listing describes a rivet-lock structure that goes together without screws, with a rubber mallet included.

Is it suitable for damp spaces?

The listing says the wire mesh shelves promote airflow and reduce damp and dust build-up. It does not give a corrosion rating for the powder coating.

Bottom line

The VEVOR garage shelving unit is a wide, deep steel rack for heavy storage, with 600 lb per shelf and 3,000 lb total according to the listing. It works in a garage or workshop with a 60 by 24 inch footprint and a level floor. Plan the load for the lower shelves and check the floor before you load it. Check the current listing before you buy.

View the VEVOR garage shelving unit on Amazon (affiliate link)